Go Back   The Hunter's Life > GUNS & AMMO > FIREARMS & OPTICS
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next

Remington 700 SPS Varminter
  #1  
Old 06-13-2008, 11:05 PM
recoil junky's Avatar
recoil junky recoil junky is offline
Super Moderator
 
Join Date: Apr 2006
Location: Craig Colorado. Elk hunting Capitol of the World!
Age: 60
Posts: 3,994
recoil junky is on a distinguished road
Default Remington 700 SPS Varminter

Here a month or three ago I was "bragging" about gettin a new .223 in Remington SPS. Well I've had for a couple months now and it's taken me that long to get it in shape, what with working gobs of overtime and all. (I'm at 28% for the year) I had to remove quite a bit of plastic in the forend to get the desired floating job, but some work with a carbide burr in the old drill, the work went rather quickly.


The cheezy plastic stock leaves a bit to be desired, but after glass bedding the action it's turned into quite a shooter. This group is at 200 yards. If the guy doing the shooting could have held the darn thing still I think the group would have been better I have yet to chronograoh this particular load but 27.9 grains of Benchmark and a 40 grain Vmax out of the 788 with a 24" barrel is running about 3800 fps if memory serves correctly, so with the 26" barrell the SPS should be pretty close to that.


The scope is a 6-24X50 BSA Contender that used to be on my 788. I wanted to use the Weaver Quad rings but unfortunatly they were to low for the 50mm objective lens so I settled for the old reliable, plain jane Weaver rings. For the money it's a pretty good piece of glass. It's no Leopould by any means but it seems to be doing a great job. Pretty clear up to about 22X, but after that it starts to get a bit darker.

I've had it out shooting ground squirrels a couple of times and it will take some getting used to. It's not like the old 788 where I just "point and shoot" but it's coming along. On Sunday it will get the real test, shooting prarie dogs.

I'll be looking to put a laminated stock on it of a yet to be determined manufacturer and use the old stock to tamp dirt in post holes. The trigger was pretty good right out of the box, but a bit of tweaking made it pretty crisp with no over travel or creep. I may go with a different firning pin/spring set-up to speed up the lock time.

If you are thinking of a new varmint rifle I'd recommend one of these. (except for Brithunter of course ) I'll have to see how it performs next to a Sako on Sunday. So far it shot neck and neck with a CZ Varminter in .223.

RJ
__________________
When you go afield, take the kids and please......................................wear your seatbelts.
Northwest Colorado.............Where the wapiti roam and deer and antelope run amuck.
Proud father of a soldier medic in The 82nd Airborne 325th AIR White Falcons
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Howa Varminter Good?? or Bad?? Chuckger FIREARMS & OPTICS 6 06-11-2007 08:33 AM
Which would you pick REMINGTON 700 SPS or REMINGTON 700 ADL infinity_656 FIREARMS & OPTICS 6 10-17-2006 12:44 PM
.308 Varminter(Callin' all Sierra shooters) Lost Hunta VARMINT/PREDATOR 0 05-31-2005 10:37 PM
remington 700 SPS neo76201 FIREARMS & OPTICS 2 04-12-2005 09:24 PM
remington bdl jeffnvegas CLASSIFIEDS 1 12-16-2004 03:30 PM



All times are GMT -5. The time now is 09:38 AM.


vBulletin skin developed by: eXtremepixels
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.