Go Back   The Hunter's Life > GUNS & AMMO > RELOADING
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next

Reloading with the Lee Loader
  #1  
Old 08-12-2010, 01:09 AM
22hornet 22hornet is offline
Super Moderator
 
Join Date: Jan 2008
Location: NSW Australia
Posts: 2,369
22hornet is on a distinguished road
Default Reloading with the Lee Loader

Here is an "over the shoulder" look at reloading with the Lee Loader.

First, the kit.

From L-R, the die, bullet seater / priming chamber, priming rod, decapping rod, decapping chamber and powder measure.


First, place your case base first in the decapping chamber. Insert the decapping rod and give a sharp tap with a plastic hammer and tap out the spent primer.



Next place the deprimed case into the die and tap home flush with the base of the die. This process sizes the neck only. (In some of the older sets, this is a full-length resize.)



To prime the sized case place a primer into the priming chamber.



Leaving the cartridge in the die, place the base of the case over the priming chamber, insert the priming rod into the neck of the case and tap the primer into place. Check to see that the primer is flush with the base of the case.


NOTE: DO NOT ATTEMPT TO RE-SEAT THE PRIMER ONCE THE CARTRIDGE IS LOADED!


Once the primer is seated place the die over the decapping chamber and using the priming rod tap the case free from the die, but leave the die sitting over the case



Using the powder measure provided or a powder scale, drop a measured amount of powder into the case through the top of the die.



Next drop the projectile in through the top of the die.



Insert the bullet seater in through the top of the die.



Tap the top of the bullet seater home. This seats the projectile into the case. (You can adjust the seating depth by screwing the top of the die in or out of the body. Once adjusted lock it into place with the locking collar.)



Lift the die from the case.



You should have a reloaded cartridge ready to go.


Happy shooting!

Last edited by gitano; 03-02-2015 at 09:34 PM..
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
My first Lee Loader! 22hornet RELOADING 10 07-16-2010 08:05 PM
The Amazing Lee Classic Loader !!! woodyplacks RELOADING 24 11-25-2008 09:10 PM
Franchi I-12 Black Synthetic Auto Loader M. R. Byrd FIREARMS & OPTICS 1 10-23-2008 02:35 AM
My first muzzle loader!! kombi1976 BLACKPOWDER/MUZZLELOADERS 6 10-16-2007 08:25 AM
New Muzzle loader for Sandhill Cranes Smokepole BLACKPOWDER/MUZZLELOADERS 4 05-12-2005 07:35 AM



All times are GMT -5. The time now is 11:42 AM.


vBulletin skin developed by: eXtremepixels
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.